Subcategories
The K&N 69-6546TWR Air Intake fits some Mitsubishi Lancer Evolution GSR models. See vehicle applications link for details. 2008-2015 Mitsubishi Lancer Evolution GSR 2.0L Turbo
CHEVROLET 262-400 SMALL-BLOCK V8 PERFORMER RPM (1500-6500 RPM) Designed for 1955-86 262-400 c.i.d. Chevy V8's for maximum power and a broad torque curve for high- performance street/marine engines. Provides power like a single-plane and throttle response like a dual-plane
This Cold Air Intake Kit from Rugged Ridge fits the 3.6L engine found in 12-17 Jeep Wrangler.
This Silver Bullet throttle body spacer produces 6 hp and 14 lbs. x ft. torque and is constructed from precision machined 6061-T6 billet aluminum and is designed using a serrated/helix design that creates turbulence in the air flow at the point just prior entry into the engine optimizing the combustion cycle.
The K&N 69-8006TTK Air Intake fit 2015-2017 Subaru WRX
The K&N 69-6012TS Air Intake fit 2010-2013 Mazda Mazdaspeed3 Turbo models.
The K&N 69-5302TTK Air Intake fit Hyundai Genesis Coupe turbo model Fits: 2010-2012 Hyundai Genesis Coupe Turbo
The K&N 69-9506TTK Air Intake fits some Volkswagen Golf, Volkswagen Golf R, and Volkswagen GTI models Fit: 2015-2017 Volkswagen Golf R & GTi 2.0T
The K&N 69-9507TTK Air Intake fits some Volkswagen Jetta, Volkswagen Jetta GLi, and Volkswagen Passat models Fits: 2014-2016 Volkswagen Jetta 1.8T & 2.0T 2015-2016 Passat 1.8T
The K&N 69-7078TS Air Intake fits 2008-2013 Infiniti G37, and 2009-2020 Nissan 370Z model Guaranteed to increase horsepower and torque Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter Engineered to provide high airflow and exceptional filtration Replaces factory air filter and intake tube
The K&N 69-1019TS Air Intake fit 2013-2015 Acura ILX and 2012-2015 Honda Civic Si model ONLY
The K&N 63-3096 Air Intake fit 2016-2017 Cadillac CTS-V Supercharged Engine.
Skunk2 70mm Alpha Series Throttle Body for Honda B16/ B17/ B18/ B20/ D15/ D16/ F20/ F22/ F23/ H22 and H23 engines 1988 - 1991 Honda CRX (Base, HF, Si) 1992 - 2001 Honda Prelude Base, Type SH 2000 - 2009 Honda S2000 Base, CR 1992 - 2001 Honda Civic DX, EX, HX 1987 - 1987 Honda Wagovan DX 1993 - 1997 Honda Civic del Sol S, Si, VTEC 1986 - 2001 Acura Integra...
Injen Evolution cold air intake 2014-2018 Corvette StingRay C7 V8 6.2L Durable rotational molded induction system. 100% CAD designed for an easy install. Fits: 2014-2018 Chevrolet Corvette C7 NON-Z06
Bracket has allowance for throttle pedal adjustment and/or the addition of a nitrous plate.
The considerable angle of the LT intakes can cause issues routing inlet plumbing and clearance to aftermarket accessory brackets. One option is to mount the throttle body upside-down, BUT this changes the air flow to the intake and can cause poor cylinder distribution and drivability issues.
A Cold Air Intake System Relocates The Filter Outside Of The Engine Compartment To Deliver Cool Air Inlet Temperatures Tuning The Inlet Pipe In Length And Diameter To Match The Engine's Resonance Helps Move More Air To The Cylinders And This Tuning Allows Us To Deliver Large Power Gains All AEM Cold Air Systems Include A Limited Lifetime Dryflow Synthetic...
Holley’s BILLET LS Throttle Bodies are the BIGGEST BORE (in the 90 to 95mm category) - MOST FEATURE LOADED available. Holley went back to the drawing board and built the ultimate air valve for your LS engine! This all new design boasts a 95 millimeter bore and a low RPM drive friendly taper.
Holley just brought EFI within range introducing Sniper EFI master kits It’s economically priced so you can have all the benefits of EFI and still have money to finish or upgrade the rest of your ride Perfect for street rods, muscle cars, off road trucks or carbureted vehicle. Put an end to cold start issues, hesitations, vapour lock, and flooding.
Go Street EFI – 400 HP System Low Cost 400HP Street EFI The Game Changer has arrived from FiTech with its latest addition to the line of Go EFI Throttle Body EFI systems. FiTech recognizes that not everyone needs or has 600HP or a wild camshaft. Fitech has taken your needs into consideration and built an EFI designed just for that purpose.
Skunk2 is proud to introduce its 72mm Pro Series Throttle Body for the '06-'07 WRX and '04-'07 STi in its signature, Black Series finish. Fits: 2006-2007 Subaru WRX 2004-2007 Subaru WRX STi
Skunk2 is proud to introduce the 70mm Pro Series Throttle Body for Honda K20A/ K20A2/ K20A3/ K20Z1 engines found in the 2002-2005 Civic Si and 2002-2006 RSX Base & Type-S chassis. 2002 - 2006 Acura RSX (Type-S)
Skunk2 is proud to introduce the 70mm Pro Series Throttle Body for Honda B16/ B17/ B18/ B20/ D15/ D16/ F20/ F22/ F23/ H22 and H23 engines found in a number of chassis from 1988-2005. 1990 - 1997 Honda Accord 1992 - 2001 Honda Prelude 2000 - 2009 Honda S2000 1992 - 2000 Honda Civic 1993 - 1997 Honda Civic del Sol (S, Si, VTEC) 1990 - 2001 Acura Integra...
Skunk2’s Pro Series Intake Manifold for Honda's B-series VTEC engines (non-GS-R) features a larger plenum and oversized runners when compared to the ITR manifold for maximum horsepower and torque gains 1992 - 2001 Acura Integra (Type R) 1999 - 2000 Honda Civic (Si) 1994 - 1997 Honda Civic del Sol (VTEC)