Combo 2017-2018 Ford F150 3.5L Ecoboost K&N Cold Air Intake + SCT BDX Tuner + AFE Catback

63-2599 + 40490 + 49-03069-B

New product

Stage 2 Combo SCT Tuner + K&N Cold Air Intake + AFE Aluminized Steel 4" Catback Exhaust

2017-2018 Ford F150 Ecoboost 3.5L 

SCT # 40490

K&N # 63-2599

AFE # 49-03069-B

Up to +70hp & +150ft-lb Torque 

More details

5 Items

CAD$1,849.95

Add to wishlist

More info

The BDX Performance Programmer delivers street-tested, dyno-proven tune files developed by SCT’s expert calibrators to unlock each vehicle’s true potential. Its sleek design, full-color display and customizable gauges help track, data log, and adjust powertrain performance to deliver more horsepower and torque when it’s needed most. Select from multiple SCT tuning levels or load up to 20 custom tune files from one of our thousands of custom tuning dealers worldwide. Direct-to device updates and custom tune delivery over WiFi means cables and computers are a thing of the past. A variety of customizable vehicle functions from timing and rev limiter adjustments, to wheel and tire size calibration enable the BDX to custom tailor your vehicle to your unique standards

K&N Air Intake

  • Guaranteed to Increase Horsepower
  • Designed to improve throttle response and engine sound
  • Lasts up to 100,000 miles before service is required (depending on driving conditions)
  • Replaces entire factory air intake system
  • Free-flowing high density polyethylene tube
  • Easy to install, usually in 90 minutes or less
  • Washable and reusable lifetime air filter
  • K&N Million Mile Limited Warranty

The K&N 63-2599 Air Intake fits some Ford Expedition, Ford F150, Ford F150 Raptor, and Lincoln Navigator models. See vehicle applications link for details.

The K&N 63-2599 AirCharger air intake system replaces the restrictive factory air filter and air intake housing on select Ford F150 models. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engine’s throttle body and turbo inlet for a guaranteed power gain. The tube accommodates the factory air temperature sensor. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicle’s existing factory mounting points. The tools needed are a screwdriver and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. 

aFe power introduces you the ATLAS dual side-exit cat-back exhaust system for the 2015-2017 Ford F-150 EcoBoost. This cat-back exhaust is constructed out of 4" 100% MIG-welded, mandrel-bent, aluminized steel tubing for maximum flow. The smooth transition bends allow for low turbulence, increasing horsepower, torque and improving throttle response. A free-flow 21” single-in dual out muffler is included which allows us to finish off the exhaust with dual side-exit wrinkle-black stainless steel tips. The tips come with laser-cut aFe Power badges for an aggressive style.

Installation is a Snap:
This ATLAS exhaust system use all factory mounting locations and is supplied with an OE hanger for the perfect fit and finish.

Leak-Free Seal: 
High quality OE-style flange and band clamps are used for a complete 360-degree sealing surface eliminating leak paths.

Aggressive Sound: 
A free-flowing muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.

Perfect Fit: 
OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. Each system comes with a OE style isolation mount for a perfect OE fit and finish.

Note Fits Wheelbase: CC/SB Super Crew/ 5.5' ft. Bed (145"); EC/SB Super Cab/ 6.5' ft. Bed

Reviews

No customer reviews for the moment.

Write a review

Combo 2017-2018 Ford F150 3.5L Ecoboost K&N Cold Air Intake + SCT BDX Tuner + AFE Catback

Combo 2017-2018 Ford F150 3.5L Ecoboost K&N Cold Air Intake + SCT BDX Tuner + AFE Catback

Stage 2 Combo SCT Tuner + K&N Cold Air Intake + AFE Aluminized Steel 4" Catback Exhaust

2017-2018 Ford F150 Ecoboost 3.5L 

SCT # 40490

K&N # 63-2599

AFE # 49-03069-B

Up to +70hp & +150ft-lb Torque