LSX engines parts & related
Go EFI 8 – 1200HP Power Adder Plus Matte Black The Go EFI 8 1200 HP (Power Adder Plus) is the Ultimate system for the serious power builder. This system features 8 High Flow injectors and is capable of fueling 1200 HP!
GM LS1/LS6 Engines & 1999-2007 4.8/5.3/6.0 Truck Engines with 24x with TRANSMISSION CONTROL 3.5" Touchscreen Included For GM LS1/LS6 Engines & 1999-2007 4.8/5.3/6.0 with 24x crank reluctor and 4L60/4L80E transmissions Plug and play with factory sensors and coil sub-harnesses Bosch wideband oxygen sensor included Pre-calibrated for no-hassle...
Terminator LS TBI Kit; Engines w/24x Crank Reluctor/Carb. Intake Manifold; w/Trans Control; Incl. TBI Unit/ECU/Bosch O2 Sensors/3.5in Screen; Hard Core Gray;
Terminator LS TBI Kit; Engines w/58x Crank Reluctor/Carb Intake Manifold; w/Trans Control; Incl. TBI Unit/ECU/Bosch O2 Sensors/3.5in Screen; Hard Core Gray;
Sniper Sheet Metal Intake Manifold Hi-Ram Fabricated LS7 Single Plane CarburetedBlack w/Sniper Logo
Sniper Sheet Metal Intake ManifoldHi-Ram FabricatedLS7 2x4 EFIIncl. High-Flow Fuel Rail KitSilver w/Sniper EFI Logo
LS Engine Drive includes SD7 A/C Compressor, Alternator, P/S Pump, Tensioner, Belt, & Pulleys
Holley Hi-Ram Intake Manifold Carbureted 2 x 4500 Dominator Sideways Mount Front/Rear Height 11.08 in. RPM Power Band 7000-8000 Black Ceramic Finish
Aluminum Flywheel GM LS9 Flat Flywheel
Terminator LS MPFI For Use w/LS2/3/2007-Current Truck Engines w/58x Reluctor Wheel w/DBW Incl. Intake/Throttle Body/Bosch Oxygen Sensors/3.5 in. Touchscreen
Terminator LS MPFI For Use w/LS2/3/2007-Current Truck Engines w/58x Reluctor Wheel w/Trans Control Incl. IntakeThrottle BodyBosch Oxygen Sensor3.5 in. Touchscreen
**Center Inlet** The Aeromotive 340 Stealth Fuel Pump is a high-output, in-tank, electric fuel pump that fits most popular EFI applications. P/N 11540 Fits most vehicles where popular aftermarket pumps are applicable Center Inlet E85 Compatible Includes universal filter sock – may not fit in some applications
Features and Specifications: 200 lph high performance fuel pump Supports up to– 450 HP EFI – Forced Induction– 600 HP EFI – Naturally Aspirated– 600 HP Carbureted – Forced Induction– 750 HP Carbureted – Naturally Aspirated
Aeromotive Phantom 340 Stealth Fuel System Features and Specifications: 340 Stealth Fuel Pump Supports up to– 700 HP EFI – Forced Induction– 850 HP EFI – Naturally Aspirated– 850 HP Carbureted – Forced Induction– 1000 HP Carbureted – Naturally Aspirated
Turbosmart mechanical boost gauge is the perfect accessory for any of our Gated Boost Control Valves Featuring simple mechanical operation, a black face with silver bezel, bright back-lighting and vacuum to 30psi range. All hook-up and panel mounting hardware included.
K&N Cold Air 2017-2018 Chevrolet Camaro ZL1 Aircharger Intake Kit Guaranteed to increase horsepower Designed to improve throttle response and engine sound Free-flowing carbon fiber tube +23.62hp @ 5379rpm +26.82lbft @ 2965rpm
Blaster LS Ignition Coil; Free-Floating Mounting Bracket; Black; 8-Pk;
WIDEBAND FAILSAFE GAUGE TECHNICAL FEATURES: Displays both boost or vacuum and AFR or Lambda simultaneously on the same gauge Internal boost sensor Bosch Wideband UEGO sensor and weld-in bung included On-Board 3+ hour Datalogging capability at 20hz per parameter
Designed for high output naturally aspirated and forced induction EFI vehicles Popular “044 Style” Installs externally or in-tank 400LPH (100gph) @ 40 PSI Compatible with Flex Fuel (E85/E90) and all types of gasoline (100% Alcohol fuels may diminish fuel pump life) Optional -10 ORB fitting pre-filter, -6 and -8 discharge adapters without the integral...
400lph Metric High-Flow Inline Fuel Pump has an M18X1.5 female inlet and M12x1.5 male outlet. Compatible with Flex Fuel (E85/E90) and all types of gasoline
Tested and compatible with ethanol fuels up to E100, methanol fuels up to M100 and all types of gasoline Designed for high output naturally aspirated and forced induction EFI vehicles In tank design Each pump is tested to flow 340 lph @ 40 PSI 39mm diameter fits most applications Includes pre filter, hose, clamps, flying lead, end cap and rubber buffer...
Tested and compatible with ethanol fuels up to E100, methanol fuels up to M100 and all types of gasoline Designed for high output naturally aspirated and forced induction EFI vehicles In tank design Each pump is tested to flow 340 lph @ 40 PSI Compact body (39mm diameter x 65mm length)